用途及特点
本机床系属活塞环内圆精车和割R槽专用数控机床,主要用于活塞环精镗内孔和油环内孔R槽车加工。加工R槽时根据环高不等同时加工1-4片环,保证每片环R槽一样深,不偏差(小于0.02mm)。
USES and features
DX15-1 type lathe CNC internal circle. The machine is inside the piston ring round finish turning and cutting R slot CNC machine tool, mainly used for piston ring precision boring hole and oil ring inner hole R tank lorry processing. Machining according to the ring high range at the same time when R slot 1-4 ring, ensure that every piece of ring R as deep groove, no deviation (less than 0.02 mm).
加工活塞环直径范围Machining piston ring diameter range |
Φ 30mm- Φ 200mm |
主轴转速 Spindle speed |
≤ 300r/min 变频调速 ≤300r/min Frequency control of motor speed |
加工活塞环效率(产量) The processing efficiency of piston ring (output) |
3min/ 筒 3 min/drum |
加工长度 |
约80mm About 80 mm |
主电动机功率 |
5.5KW |
主电动机转速 |
<1440 转/ 分无级变速 < 1440 RPM stepless variable speed |
机床外形尺寸 |
长×宽×高≈ 2360mm × 1475mm × 1370mm Long * wide * high≈2360mm×1475mm×1370mm |
机床重量(净重 ) Machine weight (net weight) |
2550Kg |