产品中心
Products
DQCX-1型 活塞环内外圆同时仿形车铣组合机床（大环）
用途及特点
本机床在DQCX型活塞环内外圆同时仿形车铣组合机床的基础上，加大了加工范围，提高了机床刚性。弥补了大环内外仿生产设备的空白。其余配置和DQCX 型活塞环内外圆同时仿形车铣组合机床一样。
USES and features
The machine type in DQCX piston ring inside and outside the circle at the same time copying milling combination machine tools, on the basis of increased the processing scope, improve the machine tool rigidity. Make up for the big ring blank of imitation production equipment. The rest of the configuration and internal DQCX type piston ring at the same time copying milling combination machine tools.
|
加工活塞环直径范围 Machining piston ring diameter range |
Φ 100mm- Φ 210mm |
|
活塞环装夹长度 Piston ring clamping length |
170mm |
|
车床主轴转速 Lathe spindle speed |
变频无级调速6-120r/min Frequency conversion stepless speed regulation 6-120r/min |
|
铣刀尺寸直径范围 Milling cutter diameter size range |
Φ 80mm- Φ 100mm |
|
机床外形尺寸 Machine tool shape dimension |
长×宽×高≈ 3100mm × 2930mm × 1787mm Long * wide * high≈3100mm×2930mm×1787mm |
|
机床重量（净重 ） Machine weight (net weight) |
约5000 kg About 5000 kg |
-
-
电话：
0513-85603958
-